Skip to content
B.06 · Construction

Gutter guards in Tulsa.

Tulsa's mature trees are beautiful. They also fill gutters with oak leaves, pecan husks, pine needles, and shingle grit from every storm. Micro-mesh gutter guards are the one product that actually keeps that debris out while letting Oklahoma rain volumes through without overflowing.

Stainless micro-meshFits 5-inch and 6-inch K-styleNew and existing gutters20-year product life

Q: What type of gutter guard works best in Tulsa?

A: Micro-mesh gutter guards outperform reverse-curve, foam, and screen alternatives in Tulsa conditions. The combination of large oak leaves, small pine needles, and shingle grit from storm-battered roofs requires a fine mesh that catches small debris while passing water volume. Reverse-curve and screen systems let the small stuff through and clog at the downspout. Micro-mesh with stainless steel screen keeps all of it out and handles Oklahoma rain rates without overflowing.

If you have mature trees on or near your property in Tulsa, you are cleaning your gutters at least twice a year. Maybe more if you are under a pecan or a big red oak. That is time on a ladder, or money paid to someone else to do it. Gutter guards do not eliminate maintenance entirely, but the right ones cut it down to once a year or less.

The problem with most gutter guard products is that they are designed to stop big leaf debris and ignore the small stuff. In Tulsa, the small stuff is the problem. Pine needles slip through large-opening screens. Shingle granules from an aging roof accumulate in the bottom of foam inserts. Pecan hulls and red oak catkins get past reverse-curve lips and clog the downspout.

Stainless steel micro-mesh has openings fine enough to stop all of it while still allowing the flow rates needed during heavy Oklahoma storms. We have tested multiple products in this market. Micro-mesh is the one we install and stand behind.

Is it time?

Six signs gutter guards would pay for themselves.

Gutter guards are not for every home. These are the situations where the math makes sense.
01

You clean gutters more than once a year

If you are up on the ladder two or three times a year, gutter guards will pay back their cost in reduced maintenance labor within a few seasons.

02

Mature oaks or pines on your property

Large trees over or adjacent to your roofline deposit debris continuously through fall. Micro-mesh handles the load that large-screen systems miss.

03

Downspouts clog seasonally

If your downspouts clog every fall with compacted leaves and pine needles, the debris is bypassing whatever guards you currently have. It is time for a product upgrade.

04

You are replacing your gutters anyway

New gutter installation is the best time to add micro-mesh guards. The cost per linear foot is lower when it is done with the gutter install rather than as a separate mobilization.

05

You have had gutter overflow or foundation moisture

Clogged gutters overflow. Overflow at the foundation contributes to soil saturation and foundation movement. Guards that prevent clogging prevent that chain of events.

06

You are not comfortable on ladders

If accessing your roofline is a safety concern, gutter guards reduce how often you need to. They do not replace ladders entirely, but they make the annual maintenance less frequent.

How we install

Four steps from clogged gutters to a clean system.

01/04

Inspect gutters first

Before guards go on, we inspect the existing gutters. Slope, seam condition, fascia integrity. If the gutters have problems, we address them. Guards on a failing gutter system just hide the problem.

Free assessment
02/04

Clean the gutters

We flush and clean the gutters before installation. Guards installed over accumulated debris trap that debris permanently. Start clean.

Full flush
03/04

Cut and fit micro-mesh

Panels are cut to fit each gutter section. They clip into the gutter lip and slide under the first course of shingles. Corners and downspout openings get special attention. No exposed gaps.

Custom fit
04/04

Test with water

We run water through the system before leaving. Flow rate confirmed. No standing water on top of the mesh. Downspouts clear. You see it working before we pack up.

Tested on-site
Product comparison

Why micro-mesh over everything else.

Micro-mesh (stainless steel screen): Keeps debris as small as shingle grit out of the gutter channel. Handles Oklahoma rain volumes. Lasts 20 or more years. The product we install.

Reverse-curve guards: Work on large flat leaves in light tree conditions. Fail with pine needles, small debris, and heavy rainfall. Common in national franchise installs. We do not install them.

Foam inserts: Fill the gutter channel with porous foam. Water passes through. So does debris, which gets trapped in the foam and decomposes. Mold and moss grow in the foam. Gutters are harder to clean than before. Not recommended.

Large-opening screens: Stop big leaves. Let through everything else. A partial solution for homes with minimal tree coverage. For most Tulsa properties with mature trees, they are not adequate.

Cost considerations

The math on gutter guards in Tulsa.

Micro-mesh guards are priced per linear foot. Most residential homes in Tulsa with 150 to 250 feet of gutter will see the investment pay back within three to five years compared to annual professional gutter cleaning costs.

If installed at the same time as new gutters, the combined mobilization cost is lower per linear foot than two separate projects.

If the project is insurance-related and the gutters were damaged in a storm, ask about adding guards to the replacement scope. Some carriers will approve them as part of the restoration, particularly when the original gutters had guards that were also damaged.

Why AE Roofing

Gutter guards from the crew that also does your roof and gutters.

Most gutter guard companies are product-only installers. They know their product. They do not know your roof, your gutter system, or what the fascia behind the hangers looks like. When a problem shows up, you have two separate contractors pointing at each other.

AE Roofing installs gutters, gutter guards, fascia and soffit, and the roof itself. When we install guards, we have already inspected or replaced the gutters they are going on. We know the fascia condition. We know the roof pitch and how it affects water volume. One crew, one accountability chain.

If guards are part of a storm restoration project, we include them in the same scope and the same claim. No additional mobilizations. No separate contractors.

Service area

Gutter guard installation across Tulsa and surrounding cities:

Broken ArrowCoverage
OwassoCoverage
BixbyCoverage
JenksCoverage
Sand SpringsCoverage
SapulpaCoverage
ClaremoreCoverage
CatoosaCoverage
Gutter guard FAQ

Questions before
the install.

Not on the list? Call us. A human picks up.

Ask us directly
The right ones do. Micro-mesh guards keep the small debris that clogs downspouts out of the gutter channel. Reverse-curve and screen guards let pine needles, shingle grit, and small leaf fragments through. In Tulsa, with mature oaks, pecans, and pine trees, micro-mesh is the product that actually reduces maintenance rather than just delaying it.
You need to clean them less, not never. Debris accumulates on top of micro-mesh and occasionally needs to be brushed off. Most homeowners with guards clean their gutters once a year instead of two or three times. The downspouts still need periodic inspection to confirm they are clear.
Yes. We install micro-mesh guards on existing gutters as long as the gutters are structurally sound and properly sloped. If the gutters are pulling away or have seam separations, those need to be fixed first or replaced before guards go on.
Reverse-curve guards use surface tension to direct water into the gutter while leaves theoretically fall off the edge. In practice, small debris collects in the curve and eventually blocks the opening. Micro-mesh uses a fine screen to filter debris before it enters the gutter. It works better with the variety of tree debris in Tulsa neighborhoods.
Quality micro-mesh guards last 20 or more years when properly installed. The mesh is stainless steel and does not corrode. The frame is aluminum and matches your gutters. They outlast most gutter systems they are installed on.

Stop climbing the ladder twice a year. Guards that actually work.

Ready when you are

The next storm
isn't waiting.

Whether your shingles are curling, your gutters are sagging, or you just want a second opinion before your insurer's deadline runs out, book the inspection. We don't charge for it, and we don't push for it.

(918) 978-2660Direct line · 7am – 9pm · 7 days

Free inspection

No cost · No pressure
We reply within 1 business hour
Free roof inspection