Skip to content
B.05 · Construction

Gutter installation in Tulsa. Seamless, sized right, done once.

Gutters are not a complicated product. They fail because they are undersized, poorly sloped, hung on rotted fascia, or pieced together from sections that eventually separate. We install seamless aluminum gutters formed on-site, sized for your actual roof drainage area, hung on solid wood.

Seamless aluminum5-inch and 6-inch K-styleSized for Oklahoma rainFoundation-safe drainage

Q: Why do gutters fail in Tulsa, and what does proper installation fix?

A: Most gutter failures in Tulsa come down to three things: undersized gutters that overflow in heavy rain, improper slope that lets water pool and pull hangers loose, and downspouts that drain too close to the foundation. Seamless gutters formed to the right size with proper slope and extended downspout drainage solve all three. The install itself is one day. The problems it prevents take years off your foundation repair budget.

Tulsa gets real rain. Not all the time, but when a storm comes through, it dumps. Standard 4-inch gutters installed on a big ranch house in south Tulsa will overflow before the storm is over. The water comes off the roof faster than the gutters can move it. It ponds at the foundation. It saturates the soil. And over five years, it shifts your slab.

Getting gutters right means sizing them to your actual roof area and pitch, setting the correct slope so water moves to the downspouts without standing, spacing downspouts so no section of gutter carries more than it should, and landing the downspouts far enough from your foundation to matter.

We install seamless gutters formed on-site from a single coil. No mid-run seams. No joints that separate over winter freeze-thaw cycles. Before the first hanger goes in, we check the fascia board. Rotted fascia is the primary reason gutters pull away from houses. We replace it before the gutters go on. One visit, no callbacks.

Know the signs

Six signs your gutters are working against you.

Gutters are cheap. Foundation repair is not. These signs mean the gutters are losing.
01

Water pooling at the foundation

If water sits against your foundation after rain, the gutters are not doing their job. It might be overflow, undersized downspouts, or extensions that terminate too short.

02

Gutters pulling away from the fascia

Sagging or separating gutters almost always mean the fascia board behind them is rotted. New gutters on rotted fascia will pull away again within a year.

03

Overflow during moderate rain

If gutters overflow in normal storms, they are either undersized, sloped incorrectly, or clogged. Any of those three will put water where it does not belong.

04

Peeling paint or staining on siding

Vertical staining below gutters means water is running over the back lip and down the siding. Usually caused by improper slope or a clog at the downspout.

05

Basement or crawl space moisture

Persistent moisture in a basement or crawl space is often a drainage issue at grade. Check the downspout extensions first before you spend money on interior waterproofing.

06

Hail dents or bent sections

After a significant hail event, aluminum gutters pick up dents that restrict flow and catch debris. If the damage is widespread, replacement is more cost-effective than repair.

How we install

Four steps from sagging gutters to proper drainage.

01/04

Measure and size

We calculate the drainage area for each section of roof, account for the pitch, and spec the right gutter size. We also walk the downspout locations and mark where extensions need to land.

Right-sized system
02/04

Check the fascia

Every fascia board gets inspected before a hanger goes in. Rotted or soft sections get replaced. We will not hang gutters on substrate that will fail in two years.

Fascia inspection
03/04

Form and hang

Gutters are formed on-site from continuous coil aluminum. Hangers go in at 24-inch intervals maximum. Slope is set at 1/16 inch per foot toward the downspouts. End caps and miters sealed with gutter sealant.

One-day install
04/04

Test and extend

We run water through the system before we leave. Downspout extensions go out at least 6 feet from the foundation, directed away from grade. We come back after the first significant rain if you have any concerns.

Tested before we leave
Materials and options

Aluminum is the right answer for most Tulsa homes.

Seamless .032 aluminum is the standard. It does not rust. It holds paint. It handles Oklahoma freeze-thaw without cracking the way vinyl can. We form it on-site in the color of your choice from a full palette of coated aluminum stock.

Copper gutters are available for historic homes or renovation projects where the visual distinction matters. They are significantly more expensive and require specific fasteners to prevent galvanic corrosion with aluminum components. We will tell you upfront if the project warrants it.

Gutter guards can be installed at the same time or added later. We recommend micro-mesh over reverse-curve styles for Tulsa conditions. Oak and pine debris from mature neighborhood trees gets past every reverse-curve system we have tested. Micro-mesh keeps it out.

Cost considerations

What drives the price on a gutter install.

Linear footage is the starting point. Most Tulsa homes need 150 to 250 feet of gutter depending on footprint and configuration.

Fascia condition changes the price. If the fascia is solid, the install is straightforward. If sections need replacement, that material and labor gets added. We identify it at the estimate so there are no surprises on the invoice.

Insurance claims for hail-damaged gutters are common. If your gutters were damaged by a recent storm, we document the damage in the same inspection we use for the roof. Most adjusters approve gutter replacement when the evidence is there. We scope it together with the full storm restoration claim.

Why AE Roofing

Gutters from the same crew that did your roof.

The relationship between your roof and your gutters matters. A new roof with the wrong drip edge creates a gap where water gets behind the gutter. Gutters hung at the wrong height relative to the roof deck direct water off the back lip. These are installation coordination problems, not product problems.

When AE Roofing does your roof and your gutters, the same PM runs both. The drip edge is set correctly before the gutters go on. The gutter height is coordinated with the roofing crew before the first shingle goes down. No gaps between trades because there is only one trade.

We also install fascia and soffit when it is needed before gutters go up. The full scope, handled by one crew, billed on one contract.

Service area

Gutter installation across Tulsa and surrounding cities:

Broken ArrowCoverage
OwassoCoverage
BixbyCoverage
JenksCoverage
Sand SpringsCoverage
SapulpaCoverage
ClaremoreCoverage
CatoosaCoverage
Gutter installation FAQ

Questions before
the install.

Not on the list? Call us. A human picks up.

Ask us directly
Most Tulsa homes need 5-inch K-style gutters with 3x4 downspouts. Homes with steep pitches, large roof sections, or that sit on lots with heavy tree coverage often need 6-inch gutters. We measure your roof slope and drainage area at the estimate and spec the size that handles Oklahoma storm volume without overflowing.
Seamless gutters are formed on-site from a single coil of aluminum to match the exact length of your roofline. No seams except at the corners and downspouts. Fewer seams means fewer leak points. It is the standard for residential installation in this market.
Well-installed aluminum gutters last 20 to 30 years. The failure points are usually the hangers pulling out of rotted fascia, seam separations on sectional systems, or downspouts that drain too close to the foundation. We address all three at install.
Yes, and that is the best time to do it. When the roof is being replaced, the fascia is already accessible. We can inspect the fascia condition, replace any rotted sections, and hang new gutters with proper slope before the roofing crew finishes. One mobilization, one cleanup.
Yes. We install micro-mesh gutter guards that keep debris out while allowing water through. They are a separate product from the gutters. We can install them at the same time or add them later. See our gutter guard page for details on the product options.

Gutters that handle real rain. Sized right, hung once.

(918) 978-2660Talk to a gutter project managerSchedule free estimate
Ready when you are

The next storm
isn't waiting.

Whether your shingles are curling, your gutters are sagging, or you just want a second opinion before your insurer's deadline runs out, book the inspection. We don't charge for it, and we don't push for it.

(918) 978-2660Direct line · 7am – 9pm · 7 days

Free inspection

No cost · No pressure
We reply within 1 business hour
Free roof inspection